§ 126-611. Engineering data.

The following engineering data is required for subdivisions; all preliminary plats shall have approximate data.

(1)

Streets. Engineering data for streets shall be as follows:

a.

Complete curve data (L, R, PC, PT) shown on the centerline or each side of the street;

b.

The length and bearings of all tangents; and

c.

The dimensions from all angle points and points of curve to an adjacent side lot line.

(2)

Lots. Complete bearings and dimensions for front, rear and side lot lines shall be provided.

(3)

Watercourses and easements. Data for watercourses and easements shall be as follows:

a.

Distances shall be provided along the side lot lines from the front lot line to the point where the side line crosses the drainage easement line or the high bank of a stream; and

b.

The traverse line shall be provided along the edges of all large watercourses in a convenient location, preferably along a utility easement if paralleling the drainage easement or stream.

(Code 1967, § 27-41(m); Ord. No. 3655, § 3, 7-28-83)